光缆gyta产品描述

Product Debbbbbbion

GYTA光缆的结构是将250µm光纤套入高模量材料制成的松套管中，松套管内填充防水化合物。缆芯的中心是一根金属加强芯，对于某些芯数的光缆来说，金属加强芯外还需挤上一层聚乙烯(PE)。松套管(和填充绳)围绕中心加强芯绞合成紧凑和圆形的缆芯，缆芯内的缝隙充以阻水填充物。涂塑铝带(APL)纵包后挤制聚乙烯护套成缆。

The fibers, 250μm,are bbbbbbbbed in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a bbbbllic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then, the cable is completed with a PE sheath.

gyta光缆产品特点

Product Features

具有很好的机械性能和温度特性

Good mechanical and temperature perbbbbance

松套管材料本身具有良好的耐水解性能和较高的强度

High strength loose tube that is hydrolysis resistant

管内充以特种油膏，对光纤进行了关键性保护

Special tube filling compound ensure a critical protection of fiber

特别设计的紧密的光缆结构，有效防止套管回缩

Specially designed compact structure is good at preventing loose tubes from shrinking

PE护套具有很好的抗紫外辐射性能

PE sheath protects cable from ultraviolet radiation

采用下列措施来确保光缆的防水性能：

To assure the water-proof function by:

单根钢丝中心加强芯

Single steel wire as central strength member

松套管内填充特种防水化合物

Special tube filling compound ensure a critical protection of fiber

完全缆芯填充

Fully filled in the cable

涂塑铝带(APL)防潮层

APL layer

光学特性Optical Characteristics

GYTA光缆一般用于通信架空/穿管，常用芯数4-288芯。

GYTA optical cables are generally used for communication overhead/conduit installation, with a common core count of 4-288.