石家庄仓粒能源科技有限公司

联系人 陈工 17603290771

TLA型喷射器安装，操作和维护手册（E500.2）

串联喷射器安装，操作和维护手册（700-20-A）

尺寸表：

串联喷射器应用尺寸（E300.1）

TLA喷射器应用尺寸（E300.2）

Eductors, Jet Pumps, Injectors, Ejectors, Tank Mixing, and Blending

喷射器，喷射泵，喷射器，喷射器，储罐混合和混合

Jacoby-Tarbox® Eductors deliver a great value for your investment. Their advanced design provides superior flow paths for optimum perbance, while the rugged construction is your assurance of reliability in demanding applications. Experienced applications personnel and flexible manufacturing capability enable Jacoby-Tarbox to meet tight delivery schedules without expedited manufacturing charges.

Jacoby-Tarbox®喷射器为您的投资带来巨大价值。 其先进的设计提供了卓越的流路，可实现性能，而坚固的结构则是您在苛刻应用中可靠性的保证。 经验丰富的应用人员和灵活的制造能力使Jacoby-Tarbox能够满足紧张的交货时间表，而无需增加制造费用

In-Line Eductors

• Decrease maintenance cost – No moving parts
• Use less energy – Venturi-based pumping of liquids, gases, and even solids
• Also known as Jet Pump, Injector, Ejector, Jet Syphon, Steam Syphon, Venturi Pump

In-Tank Eductors

• Use less energy – More efficient than nozzles alone, to mix, blend, suspend solids and heat
• Decrease maintenance cost – No moving parts
• Smaller pump required – Amplifies pump capabilities
• Heat more quietly and efficiently than sparging

串联喷射器

• 降低维护成本–无活动部件
• 使用更少的能量–基于文丘里管的液体，气体甚至固体的泵送
• 也称为喷射泵，喷射器，喷射器，喷射弯管，蒸汽弯管，文丘里泵

罐内喷射器

• 使用更少的能量–比单独使用喷嘴更有效，可以混合，混合，悬浮固体和加热
• 降低维护成本–无活动部件
• 需要更小的泵–增强泵的能力
• 比喷射更安静，更有效地加热

In-Line Eductors串联喷射器

Superior By Every Measure

The Clark-Reliance Corporation, with its Jerguson® / Jacoby-Tarbox® Eductors (JRG/JT), delivers greater value for your investment on every count.  Their advanced design provides superior flow paths for optimum perbance, while the rugged construction is your assurance of reliability on demanding applications.  They are backed by superior application engineering services, and can be supplied to meet tight delivery schedules.  In addition, they are offered at prices equal to or lower than other makers of eductors, or conventional electric pumps.

各项措施均出众

Clark-Reliance公司及其Jerguson®/Jacoby-Tarbox®喷射器（JRG / JT）为您的每项投资提供更大的价值。 其先进的设计提供了卓越的流路，可实现性能，而坚固的结构则是您在苛刻应用中可靠性的保证。 它们以优质的应用工程服务为后盾，可以提供以满足严格的交货时间表。 此外，它们的价格等于或低于其他喷射器或传统电动泵制造商的价格。

Advanced Design…Full ASME Ratings

JRG/JT Eductors feature an advanced design to assure flows better than those of other eductors. Unlike typical cast units, which meet only a nominal pressure rating, JRG/JT Eductors meet rigorous ASME specifications. All of our eductors have a smooth specified finish for critical flow paths. In comparison, sections of the flow paths in competitive cast units may be left rough to keep production costs down. Also, the mixing tube section of JRG/JT Eductors has been designed to withstand the stress to which it will be subjected . This is the point at which many other makes are weak and subject to breakage during installation. All units have wrench flats to prevent damage during installation. Providing a smooth flow path is critical to optimum eductor perbance. As a result of this feature, the motive fluid achieves more velocity through the eductor body, and this means more energy is used for pick-up of the suction fluid. Also, better flow paths in the diverging section of the e ductor allow it to achieve better discharge pressures.

先进的设计…完整的ASME等级

JRG / JT喷射器具有先进的设计，可确保流量比其他喷射器更好。与仅满足额定压力等级的典型铸造设备不同，JRG / JT喷射器符合严格的ASME规范。我们所有喷射器的关键流道均具有的光滑表面。相比之下，竞争性铸造机组中的流路部分可能会比​​较粗糙，以降低生产成本。同样，JRG / JT喷射器的混合管部分设计为可承受其应力。在这一点上，许多其他品牌的产品很弱，并且在安装过程中容易损坏。所有单元都有扳手平面，以防止在安装过程中损坏。提供平滑的流路对于喷射器性能至关重要。由于此功能，动力流体可通过喷射器主体达到更高的速度，这意味着将更多的能量用于抽吸流体。同样，在导管的发散部分中更好的流动路径可以使其获得更好的排出压力