HB-YD114(Q) |
1.6 |
50-55 (受强烈冲击后 After high impact) |
高锰钢堆焊焊丝,受强烈冲击后,表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
HB-YD115(Q) |
1.6 |
50-55 (受强烈冲击后After high impact) |
用于受严重冲击高锰钢堆焊,加工硬化效果显著。 Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
HB-YD165(Q) |
1.6 |
60-65 |
高硬度耐磨焊丝,适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD172(Q) |
1.6 |
≥40 |
用于堆焊齿轮、挖泥斗、矿山机械等磨损件 Applied to repair surface of high impact wear parts, such as gear aud bucket and mining machinery. |
HB-YD207(Q) |
1.6 |
≥50 |
用于堆焊推土机 ,螺旋桨等磨损零件 Applied to repair surface of high wear parts, such as bulldozer blade and propeller. |
HB-YD212(Q) |
1.2/1.6 |
≥50 |
用于堆焊各种受磨损的机件表面,如齿轮、挖斗、矿山机械 Applied to repair surface of wear parts, such as gear mud bucket and mining machinery. |
HB-YD256(Q) |
1.6 |
HB≥170 |
高锰钢堆焊,适用于破碎机等受冲击磨损部位的堆焊 High-manganese steelhardfacing flux-cored Wires,it is applied to repair surface of high impact wear parts, such as Crusher. |
HB-YD258(Q) |
1.6 |
55-60 |
用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD265(Q) |
1.6 |
60-65 |
高硬度耐磨焊丝,适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD322(Q) |
1.6 |
≥55 |
用于堆焊各种冲模及切削刃具,兼用于修复要求耐磨损性能较高之机械零件 Applied to repair surface ofhigh wear resistanceparts, such as die and cuttingcutlery. |
HB-YD327A(Q) |
1.6 |
≥55 |
专门用于模具堆焊,耐磨性能高于D322 Used tomouldsurfacing, wear resistance is better than D322. |
HB-YD337(Q) |
1.6 |
≥48 |
用于铸钢或锻钢上堆焊锻模 Applied to repairforging dieatcast steelorforging steel. |
HB-YD397(Q) |
1.6 |
≥40 |
用于堆焊铸钢或锻钢做坯体的热锻模或堆焊高强度耐磨件 Applied to repair hotforging dieatcast steelor forging steel, or highstrengthwear surfacing. |
HB-YD405 (Q) |
1.6 |
50-59 |
用于热轧辊开坯辊堆焊 Applied to repair hot-rolling blooming rollor. |
HB-YD430A(Q) |
1.6 |
20-35 |
打底层堆焊焊丝 A backing hardfacing flux-cored Wires |
HB-YD488A(Q) |
1.6 |
45-50 |
用于轧辊堆焊 Applied to repair rollor |
HB-YD507Mo(Q) |
1.6 |
35-45 |
用于510℃以下中高压阀门堆焊 Applied to valve which operating tdivperature is less than 510℃. |
HB-YD518(Q) |
1.6 |
40-50 |
用于连铸辊堆焊 Applied to repaircontinuous caster roller |
HB-YD688(Q) |
1.6 |
50-60 |
用于磨煤辊打底焊(韧性好,可以多层堆焊) Used to coal roller backing welding. |
HB-YD788(Q) |
1.6 |
55-62 |
硬度高,可以多层堆焊。 High hardness andmulti-layer welding |
HB-YD888(Q) |
1.2, 1.6 |
60-65 |
硬度高,堆焊层厚度不超过6mm。 High hardness, but thethicknessofsurfacing layeris less than 6mm. |
HB-YD888Ni(Q) |
1.2 |
58-65 |
高铬合金焊丝,用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD988(Q) |
1.6 |
55-63 |
高铬合金焊丝,用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD990(Q) |
1.6 |
55-65 |
用于高温耐磨堆焊。 Applied to repair surface ofhigh tdivperaturewear parts. |
HB-YD58(Q) |
1.6 |
55-60 |
高温耐磨焊丝,用于化推焦机磨靴的堆焊。 high tdivperaturewear hardfacing wires, |
HB-YD67(Q) |
1.6 |
58-63 |
用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD95(Q) |
1.6 |
55-63 |
高铬合金焊丝,用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-DG7(Q) |
1.6 |
52-60 |
地铁盾构施工 刃口堆焊专用,也可用于煤碳石装载机料斗和刃口堆焊修复。 Applied to repair surface of high impact wear parts, such as shiled machine, exc ator bucket and hopper of mining machinery products. |
- 公司类型私营独资企业
- 经营模式生产加工-私营独资企业
- 联系人李经理
- 联系手机13764937066
- 联系固话013-764937066
- 公司地址中国(上海)自由贸易试验区临港新片区环湖西二路888号C楼
-
龙洋 ND钢药芯焊丝09CrCuSb 低温耐硫酸露点腐蚀钢焊接 ¥33.00
-
船王 纯铝药芯焊丝 1070铝铝药芯焊丝 焊接铝件 铝板 ¥55.00
-
ND钢专用药芯焊丝 1.2 1.6mm耐候钢专用焊材包邮 ¥25.00
-
三建 R71耐热钢钨极氩弧焊丝T91/P91耐热钢焊丝 R71耐热钢药芯焊丝 ¥25.00
-
厂家供应R50耐热钢焊丝 R50药芯焊丝 R50耐热钢合金焊条 ¥25.00
-
R40耐热钢药芯焊丝 r40耐热钢焊丝批发价格 R40耐候钢药芯焊丝 厂家供 ¥25.00
-
R31耐热钢焊丝R30氩弧焊丝R40耐热钢氩弧焊丝 ¥22.00
-
耐热钢焊丝R30/31/40/50药芯/氩弧/实心焊丝30CrMnSi/12Cr2MoWVB ¥22.00
-
HS112钴基焊丝HS112耐磨焊丝 ¥360.00
-
HS111耐磨焊丝HS111耐磨气保药芯焊丝 ¥30.00
-
HS103耐磨药芯焊丝/HS103耐磨堆焊焊丝 ¥32.00
-
HS101耐磨药芯焊丝HS101耐磨焊丝 ¥32.00
-
雅安供应 铁路路轨和道岔修补药芯焊丝 TY-YD101M 大型工件修复 翻新堆焊 ¥35.00
-
眉山代理埋弧焊丝TY-YD013M 铸铁轧棍过渡层修补埋弧焊丝 匹配HJ260国产焊剂效果好 ¥35.00
-
资阳出售 TY-YD012M埋弧自动堆焊药芯焊丝 履带轮 履带块修补药芯焊丝 ¥35.00