免费会员
进入店铺
店铺留言
图文介绍
产品参数
供应商信息
GE
Measurement & Control Solutions
Moisture Target™Series 6 Moisture Analyzer Features
• Low-cost, single-channel hygrometer for OEM
applications
• M Series moisture probe or VeriDri moisture
transmitter compatible
• NEMA 4 weatherproof membrane front display/
keypad
• Built-in isolated current or voltage analog output
• MicroSD card for logging data up to 32 GB
• Panel-mount and board-level confi gurations
• Fail-safe fault alarm relay
• Two bbbb C measurement alarm relays
• Upgrades from MTS5 with adaptor face plate
Applications
This single-channel analyzer measures moisture
in compressed air and gases. Designed for
permanent installations, it is used in conjunction
with M Series moisture probe or VeriDri moisture
transmitter for air/gas dryer original equipment
manufacturer (OEM) applications:
• Regenerative desiccant air or gas dryers
• Plastic drying applications prior to injection/
blowmolding
• Medical air dryers
• Glove box monitoring
Low Cost, Real-Time
Moisture Measurement
The Moisture Target Series 6 is an economical, single
channel, aluminum oxide hygrometer in the Moisture
Series line of analyzers. It is intended for OEM
applications requiring low-cost, accurate, real-time
moisture measurement.
Improves OEM Product
Perbbbbance
The Moisture Target Series 6 can signifi cantly
enhance the perbbbbance of OEM products by
allowing closed-loop control of moisture. For
example, in a regenerative dryer application it
can improve effi ciency by initiating desiccant bed
regeneration when needed, rather than on an openloop
timed cycle.
Panel-Mount
The panel-mount Moisture Target Series 6 comes
in a compact DIN standard meter housing for
applications where space is at a premium. The case
slides directly into the panel cutout, and is held in
place from the rear by captive screws.
The Moisture Target Series 6 can be supplied with
a bezel adaptor to allow installation into existing
Moisture Target Series 5 panel cut-outs.
Uses M Series Probes and
VeriDri Transmitter
The Moisture Target Series 6 uses M Series
aluminum oxide moisture sensor probe or VeriDri
moisture transmitter. M Series probes and VeriDri
transmitter are rugged and accurate true absolute
humidity sensors with calibration traceable to NIST.
Exceptional dynamic range, speed of response and
calibration stability have made the aluminum oxide
sensor the standard for perbbbbance and value in
industrial moisture measurement for more than 40
years.
Microprocessor-Based
Electronics
The microprocessor-based Moisture Target Series 6
accurabbby tracks fast-changing process conditions
and displays dew/frost point temperature in °F or °C
on an LCD. Dew/frost point is also available as an
analog voltage or current output, and the Moisture
Target Series 6 features built-in isolation to ensure
the integrity of signals to remote devices. The unit
also features two bbbb C alarm relays for high and
low dew/frost point limits. The microprocessor-based
electronics and six-button keypad combine to make
selection of analog output zero and span, alarm
setpoints fast and easy, and entry of calibration data
sample.
Series 6 Specifi cations
Electronics
Intrinsic Safety
External safety barrier for moisture bbbbb (optional)
European Compliance
Complies with EMC Directive 2004/108/EC and
2006/95/EC Low Voltage Directive (Installation
Category II, Pollution Degree II)
bbbbb
Moisture signal from GE Sensing thin-fi lm aluminum
oxide moisture sensor on an M Series probe or VeriDri
transmitter
Measurement & Control Solutions
Moisture Target™Series 6 Moisture Analyzer Features
• Low-cost, single-channel hygrometer for OEM
applications
• M Series moisture probe or VeriDri moisture
transmitter compatible
• NEMA 4 weatherproof membrane front display/
keypad
• Built-in isolated current or voltage analog output
• MicroSD card for logging data up to 32 GB
• Panel-mount and board-level confi gurations
• Fail-safe fault alarm relay
• Two bbbb C measurement alarm relays
• Upgrades from MTS5 with adaptor face plate
Applications
This single-channel analyzer measures moisture
in compressed air and gases. Designed for
permanent installations, it is used in conjunction
with M Series moisture probe or VeriDri moisture
transmitter for air/gas dryer original equipment
manufacturer (OEM) applications:
• Regenerative desiccant air or gas dryers
• Plastic drying applications prior to injection/
blowmolding
• Medical air dryers
• Glove box monitoring
Low Cost, Real-Time
Moisture Measurement
The Moisture Target Series 6 is an economical, single
channel, aluminum oxide hygrometer in the Moisture
Series line of analyzers. It is intended for OEM
applications requiring low-cost, accurate, real-time
moisture measurement.
Improves OEM Product
Perbbbbance
The Moisture Target Series 6 can signifi cantly
enhance the perbbbbance of OEM products by
allowing closed-loop control of moisture. For
example, in a regenerative dryer application it
can improve effi ciency by initiating desiccant bed
regeneration when needed, rather than on an openloop
timed cycle.
Panel-Mount
The panel-mount Moisture Target Series 6 comes
in a compact DIN standard meter housing for
applications where space is at a premium. The case
slides directly into the panel cutout, and is held in
place from the rear by captive screws.
The Moisture Target Series 6 can be supplied with
a bezel adaptor to allow installation into existing
Moisture Target Series 5 panel cut-outs.
Uses M Series Probes and
VeriDri Transmitter
The Moisture Target Series 6 uses M Series
aluminum oxide moisture sensor probe or VeriDri
moisture transmitter. M Series probes and VeriDri
transmitter are rugged and accurate true absolute
humidity sensors with calibration traceable to NIST.
Exceptional dynamic range, speed of response and
calibration stability have made the aluminum oxide
sensor the standard for perbbbbance and value in
industrial moisture measurement for more than 40
years.
Microprocessor-Based
Electronics
The microprocessor-based Moisture Target Series 6
accurabbby tracks fast-changing process conditions
and displays dew/frost point temperature in °F or °C
on an LCD. Dew/frost point is also available as an
analog voltage or current output, and the Moisture
Target Series 6 features built-in isolation to ensure
the integrity of signals to remote devices. The unit
also features two bbbb C alarm relays for high and
low dew/frost point limits. The microprocessor-based
electronics and six-button keypad combine to make
selection of analog output zero and span, alarm
setpoints fast and easy, and entry of calibration data
sample.
Series 6 Specifi cations
Electronics
Intrinsic Safety
External safety barrier for moisture bbbbb (optional)
European Compliance
Complies with EMC Directive 2004/108/EC and
2006/95/EC Low Voltage Directive (Installation
Category II, Pollution Degree II)
bbbbb
Moisture signal from GE Sensing thin-fi lm aluminum
oxide moisture sensor on an M Series probe or VeriDri
transmitter
品牌GE
型号GEMTS6露点仪
功率40W
电压3V
执行标准国标
测量范围-80℃~20℃
环境温度-25～60℃
露点范围-60℃~60℃
精度等级0.2
是否进口是
加工定制否
外形尺寸详见包装
产地其他
深圳市海辰微科技有限公司
- 公司类型个体工商户
- 经营模式代理商-个体工商户
- 联系人张经理
- 联系手机18026976108
- 联系固话0755-86716080
- 公司地址深圳市南山区高新北六道27号兰光科技大厦A613
主营业务
工业自动化产品销售及售后服务，变频器 PLC
工业自动化产品销售及售后服务，海辰微科技专业代理GE Consumer & Industrial传动控制产品，AV-300i 全数字微机控制矢量型交流调速装置，DV-300 直流传动，RS-300 回馈单元，AF-300，AF-600，AF-300 G11，AF-300 P11，IS-200,AC-1000，AC-2000；GE Fanuc全系列PLC，VersaMax,90-30,90-70,PACSystemsRX3i, PACSystems RX7i；GE EX2100 励磁系统,GE VME嵌入式系统。
公司以强大的价格优势及雄厚的技术力量为基础，在工程实施和产品销售中以突出技术领先的优势，充分体现用户购买产品等于购买服务的理念。为煤炭、电力、冶金、化工、医药、城市公共设施等行业提供可靠的GE产品，并提供卓有成效的用户技术培训和完善的售后服务，以帮助企业改进产品质量，保障安全生产，提高生产效率。
我们公司始终致力于成为一流自动化高科技企业，凭借我们先进的自动化技术，可靠的产品质量，优惠合理的产品价格，优质快捷的售后服务，赢得用户的信赖。
我们的目标是：以最好的工业自动化技术，优质的产品和全方位的服务，提高用户的自动化生产水平。
我们的精神：诚信，敬业，团结，创新
我们的宗旨：互惠共赢
同类产品
-
DP500便携式露点仪 ¥8888.00 -
FM1200便携式精密露点仪 ¥32000.00 -
FM1200压缩空气便携式露点仪 ¥32000.00 -
FM1200高精度便携式露点仪 ¥32000.00 -
FM1200便携式露点仪 ¥32000.00 -
FM960在线式压缩空气露点仪 ¥12000.00 -
FM960在线式露点仪 ¥12000.00 -
FM950在线式露点微水检测仪 ¥14000.00 -
FM950露点仪 ¥14000.00 -
FM950在线式露点检测仪 ¥14000.00
-
FM950在线式露点仪 ¥14000.00 -
FM870在线式露点仪 ¥18000.00 -
FM850在线式温湿度露点分析仪 ¥18000.00 -
FM850在线式温湿度露点检测仪 ¥18000.00 -
在线式压缩空气温湿度露点仪 ¥18000.00
