HB-YD788(Q)耐磨焊丝 堆焊药芯焊丝价格
HB-YD114(Q) |
1.6 |
50-55 (受强烈冲击后 After high impact) |
高锰钢堆焊焊丝,受强烈冲击后,表面具有加工硬度的特点。 High-manganese steelhardfacing flux-cored wires, and applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
HB-YD115(Q) |
1.6 |
50-55 (受强烈冲击后After high impact) |
用于受严重冲击高锰钢堆焊,加工硬化效果显著。 Applied to repair surface of high impact wear parts, cladding layer is impacted with work hardening. |
HB-YD165(Q) |
1.6 |
60-65 |
高硬度耐磨焊丝,适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD172(Q) |
1.6 |
≥40 |
用于堆焊齿轮、挖泥斗、矿山机械等磨损件 Applied to repair surface of high impact wear parts, such as gear aud bucket and mining machinery. |
HB-YD207(Q) |
1.6 |
≥50 |
用于堆焊推土机刀片,螺旋桨等磨损零件 Applied to repair surface of high wear parts, such as bulldozer blade and propeller. |
HB-YD212(Q) |
1.2/1.6 |
≥50 |
用于堆焊各种受磨损的机件表面,如齿轮、挖斗、矿山机械 Applied to repair surface of wear parts, such as gear mud bucket and mining machinery. |
HB-YD256(Q) |
1.6 |
HB≥170 |
高锰钢堆焊,适用于破碎机等受冲击磨损部位的堆焊 High-manganese steelhardfacing flux-cored Wires,it is applied to repair surface of high impact wear parts, such as Crusher. |
HB-YD258(Q) |
1.6 |
55-60 |
用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD265(Q) |
1.6 |
60-65 |
高硬度耐磨焊丝,适用于磨粒磨损表面堆焊 High hardness wear-resistant wire, it is used to abrasive wearsurfacing welding. |
HB-YD322(Q) |
1.6 |
≥55 |
用于堆焊各种冲模及切削刃具,兼用于修复要求耐磨损性能较高之机械零件 Applied to repair surface ofhigh wear resistanceparts, such as die and cuttingcutlery. |
HB-YD327A(Q) |
1.6 |
≥55 |
专门用于模具堆焊,耐磨性能高于D322 Used tomouldsurfacing, wear resistance is better than D322. |
HB-YD337(Q) |
1.6 |
≥48 |
用于铸钢或锻钢上堆焊锻模 Applied to repairforging dieatcast steelorforging steel. |
HB-YD397(Q) |
1.6 |
≥40 |
用于堆焊铸钢或锻钢做坯体的热锻模或堆焊高强度耐磨件 Applied to repair hotforging dieatcast steelor forging steel, or highstrengthwear surfacing. |
HB-YD405A(Q) |
1.6 |
50-59 |
用于热轧辊开坯辊堆焊 Applied to repair hot-rolling blooming rollor. |
HB-YD430A(Q) |
1.6 |
20-35 |
打底层堆焊焊丝 A backing hardfacing flux-cored Wires |
HB-YD488A(Q) |
1.6 |
45-50 |
用于轧辊堆焊 Applied to repair rollor |
HB-YD507Mo(Q) |
1.6 |
35-45 |
用于510℃以下中高压阀门堆焊 Applied to valve which operating tdivperature is less than 510℃. |
HB-YD518(Q) |
1.6 |
40-50 |
用于连铸辊堆焊 Applied to repaircontinuous caster roller |
HB-YD688(Q) |
1.6 |
50-60 |
用于磨煤辊打底焊(韧性好,可以多层堆焊) Used to coal roller backing welding. |
HB-YD788(Q) |
1.6 |
55-62 |
硬度高,可以多层堆焊。 High hardness andmulti-layer welding |
HB-YD888(Q) |
1.2, 1.6 |
60-65 |
硬度高,堆焊层厚度不超过6mm。 High hardness, but thethicknessofsurfacing layeris less than 6mm. |
HB-YD888Ni(Q) |
1.2 |
58-65 |
高铬合金焊丝,用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD988(Q) |
1.6 |
55-63 |
高铬合金焊丝,用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD990(Q) |
1.6 |
55-65 |
用于高温耐磨堆焊。 Applied to repair surface ofhigh tdivperaturewear parts. |
HB-YD58(Q) |
1.6 |
55-60 |
高温耐磨焊丝,用于化推焦机磨靴的堆焊。 high tdivperaturewear hardfacing wires, |
HB-YD67(Q) |
1.6 |
58-63 |
用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-YD95(Q) |
1.6 |
55-63 |
高铬合金焊丝,用于耐磨表面堆焊 Applied to repair surface of wear parts. |
HB-DG7(Q) |
1.6 |
52-60 |
地铁盾构施工刀具刃口堆焊专用,也可用于煤碳石装载机料斗和刃口堆焊修复。 Applied to repair surface of high impact wear parts, such as shiled machine, excavator bucket and hopper of mining machinery products. |
- 公司类型私营独资企业
- 经营模式生产加工-私营独资企业
- 联系人刘新
- 联系手机18331932608
- 联系固话0319-8183726
- 公司地址新开发区130号
-
三建 TMR-81B2 耐热钢药芯焊丝 E81T1-B2C 药芯焊丝 R30耐热钢药芯焊丝 ¥19.00
-
2.4375蒙乃尔合金焊丝 焊接阀门零部件 造纸设备上的刮浆刀片 ¥165.00
-
大西洋 CHT81B2VR药芯焊丝 R31耐热钢药芯焊丝 ¥25.00
-
龙洋ND钢焊丝MIG-H09CrCuSb 1.2 mm ¥12.00
-
钎焊铜和铜合金用BCu86SnP 铜磷锡盘丝 208黑焊丝 ¥118.00
-
厂家定做 多圈焊环 2圈银磷铜焊环 3圈磷铜焊环 4圈黄铜焊环 ¥89.00
-
5%银磷铜焊条HL205银磷铜焊丝HAg-5B银磷铜焊环/银磷铜焊片 ¥399.00
-
厂家定做 银磷铜焊环 5%银磷铜焊环 BCu89PAg 铜及铜合金接头焊接 ¥385.00
-
BCu92P 磷铜焊环 铜磷焊环 钎焊不受冲击载荷的铜和黄铜零件 ¥85.00
-
供应焊接铜及铜合金管用磷铜焊环铜磷锡焊环208黑焊环银磷铜焊环2-15B银铜磷焊环 ¥85.00
-
ERCuAl-A1铝青铜焊丝HS214铜焊丝C61000 ¥1.00
-
促卖LANCASTER WIRE焊丝 ¥538.00
-
垃圾撕碎机修补耐磨焊丝厂家 ¥35.00
-
垃圾撕碎机堆焊修复耐磨焊丝包邮厂家 ¥35.00
-
垃圾粉碎机修复进口耐磨焊丝厂家 ¥35.00