查找一下液下渣浆泵叶轮A双桥液下渣浆泵叶轮

耐磨橡胶接头采用顺丁橡胶接头,顺丁橡胶接头（会泉泵业）高弹性 高顺式丁二烯橡胶是当前所有橡胶中弹性最高的一种橡胶接头,甚至在很低的温度下,分子链段都能自内运动,所以能在很宽的温度范围内显示高弹性,甚至在-40℃时还能保持。

一、产品概述SP液下渣浆泵为立式离心液下渣浆泵，浸入液下，用于输送磨蚀性、粗颗粒、高浓度渣浆。不需要任何轴封和轴封水，在吸入量不足的工况下也能正常工作。

SP型液下渣浆泵过流部件由耐磨金属制成。 

根据渣浆池液面的高低，可选择不同长度的泵传动轴或吸入管。 

采用多种速度和多种变型方式，使得泵在最佳工况下运行，使用寿命长，运行效益高，能满足多类恶劣的输送条件。 

Second, SP liquid slurry pump application Range 
Slurry pump is mainly suitable for conveying corrosive, coarse particles, high concentration slag slurry. Widely used in bbbbllurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Third, SP liquid slag slurry pump structure debbbbbbion 
The difference between the slurry pump structure of SPR liquid and the slurry pump under SP liquid is only that the parts of the dipping slag slurry are lined with corrosion-resistant rubber, the parts lined with rubber include shafts, pumps, impellers, protective plates and filters, and the connecting bolts in the lower part of the immersion liquid are equipped with rubber protective sleeves, and the transmission parts and SP pumps
SP Liquid slurry pump pump body, impeller guard plate are made of wear-resistant materials. The pump end of the bearing body adopts a double row tapered roller bearing, and the driving end adopts a single row cylindrical roller bearing, which can withstand the maximum axial load of the pump. The bearing body is fitted with a motor seat or motor bracket, which can be driven by a direct or triangle belt drive. The pump should be immersed in the slurry pool to work, the pump body suction inlet with a filter, can prevent large particles into the human pump. Jdhuiquan5.15
Four, the depth of the liquid can be extended pump self-belt liquid depth of about 70cm, according to customer requirements to increase the depth of the liquid, (the price with the addition of a long number of meters and different) please customers and customer service personnel in advance to explain.

查找一下液下渣浆泵叶轮A双桥液下渣浆泵叶轮

构成环境污染，损害泵的过流部件，最终影响泵的使用寿命。石家庄水泵厂渣浆泵选型在规划工况点时，因为渣浆泵液流方向与叶片方向共同，脱流丢失，冲击丢失，旋涡丢失比较小，接近于零，渣浆泵正常运行，不会发生噪音。但当渣浆泵在小流量区作业时，因为违背规划点，构成渣浆泵配件脱流丢失，冲击丢失，旋涡丢失进一步加大，这些丢失在发生的一起伴随着大量的水力噪声和机械振荡，对泵的过流件构成较大的冲击力，磨损力。渣浆泵振荡噪声增大然后影响泵的全体使用寿命。

五、型号意义

    40 PV-SP

   40----------吐出口径40mm

   PV--------- PV型轴承组件

   SP----------液下泵

水泵安装

 泵安装的好坏对泵的运行和寿命冇重要影响，所以安装和校正必须仔细进行。泵的外形及安装尺寸。