我要找液下渣浆泵型号A赤城液下渣浆泵型号
性能参数的选择泵型确定后,扬程和流量是选择泵规格大小和是否串联的依据。输送高浓度强磨蚀性渣浆,一般不选用泵最高转数nmax(性能曲线中多种转数的最高转数),选择转数为3/4nmax左右比较合适。当选定的泵在3/4 nmax时,流量合适而扬程达不到,可采用多台泵串联形式。对于沃曼泵,不同的浆体,流量范围也要有所限制;对于高浓度强磨蚀的渣浆。2流量应选泵最高效率对应流量的40—80%范围内;对于浓度低磨蚀渣浆,流量应选在泵最高效率对应流量的40%—100%范围内。一般不选择在最高效率对应流量的100%—120%范围内。
一、产品概述SP液下渣浆泵为立式离心液下渣浆泵,浸入液下,用于输送磨蚀性、粗颗粒、高浓度渣浆。不需要任何轴封和轴封水,在吸入量不足的工况下也能正常工作。
SP型液下渣浆泵过流部件由耐磨金属制成。
根据渣浆池液面的高低,可选择不同长度的泵传动轴或吸入管。
采用多种速度和多种变型方式,使得泵在最佳工况下运行,使用寿命长,运行效益高,能满足多类恶劣的输送条件。
Second, SP liquid slurry pump application Range
Slurry pump is mainly suitable for conveying corrosive, coarse particles, high concentration slag slurry. Widely used in bbbbllurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Third, SP liquid slag slurry pump structure debbbbbbion
The difference between the slurry pump structure of SPR liquid and the slurry pump under SP liquid is only that the parts of the dipping slag slurry are lined with corrosion-resistant rubber, the parts lined with rubber include shafts, pumps, impellers, protective plates and filters, and the connecting bolts in the lower part of the immersion liquid are equipped with rubber protective sleeves, and the transmission parts and SP pumps
SP Liquid slurry pump pump body, impeller guard plate are made of wear-resistant materials. The pump end of the bearing body adopts a double row tapered roller bearing, and the driving end adopts a single row cylindrical roller bearing, which can withstand the maximum axial load of the pump. The bearing body is fitted with a motor seat or motor bracket, which can be driven by a direct or triangle belt drive. The pump should be immersed in the slurry pool to work, the pump body suction inlet with a filter, can prevent large particles into the human pump. Jdhuiquan5.15
Four, the depth of the liquid can be extended pump self-belt liquid depth of about 70cm, according to customer requirements to increase the depth of the liquid, (the price with the addition of a long number of meters and different) please customers and customer service personnel in advance to explain.
我要找液下渣浆泵型号A赤城液下渣浆泵型号
渣浆泵可广泛用于矿山,电力,冶金,煤炭,环保等行业输送含有磨蚀性固体颗粒的浆体。如冶金矿厂矿浆输送,火电厂水力除灰,洗煤厂煤浆及重介输送,疏浚河道,河流清淤等。使用环境的不同决定了渣浆泵的选型,同时渣浆泵的选型设计也关系着着渣浆泵本身及其渣浆泵配件的使用寿命及其运行是否稳定。所以说一个科学的设计,对渣浆泵是极其重要的
五、型号意义
40 PV-SP
40----------吐出口径40mm
PV--------- PV型轴承组件
SP----------液下泵
水泵安装
泵安装的好坏对泵的运行和寿命冇重要影响,所以安装和校正必须仔细进行。泵的外形及安装尺寸。
- 公司类型私营独资企业
- 经营模式生产加工-私营独资企业
- 联系人徐经理
- 联系手机13582138818
- 联系固话0312-3428054
- 公司地址河北省石家庄市桥西
-
凌河耐腐蚀长轴渣浆泵V三相15千瓦立式离心泵组装过程 ¥28966.00
-
普兰耐腐蚀立式渣浆泵V沉淀池抽渣立式离心泵单吸悬臂式 ¥28966.00
-
南芬耐腐蚀液下泥浆泵V三相5.5千瓦立式离心泵耐磨蜗壳 ¥28966.00
-
盘山耐腐蚀液下泥浆泵V三相3千瓦立式离心泵耐磨叶轮 ¥28966.00
-
千山耐腐蚀立式渣浆泵V矿用抽渣立式离心泵轴承座 ¥28966.00
-
长海耐腐蚀液下抽渣泵V三相75千瓦立式离心泵拓宽门路 ¥28966.00
-
彰武耐腐蚀立式渣浆泵V地坑排污立式离心泵轴承座 ¥28966.00
-
金州耐腐蚀立式渣浆泵V矿用抽渣立式离心泵单吸悬臂式 ¥28966.00
-
凤城耐腐蚀长轴渣浆泵V三相15千瓦立式离心泵组装过程 ¥28966.00
-
顺城耐腐蚀立式渣浆泵V地坑排污立式离心泵轴承座 ¥28966.00
-
平山耐腐蚀液下泥浆泵V三相4千瓦立式离心泵耐磨蜗壳 ¥28966.00
-
南票耐腐蚀长轴渣浆泵V三相18.5千瓦立式离心泵输送高浓度 ¥28966.00
-
法库耐腐蚀液下抽渣泵V三相37千瓦立式离心泵定制加长轴 ¥28966.00
-
于洪耐腐蚀立式渣浆泵V矿用抽渣立式离心泵单吸悬臂式 ¥28966.00
-
西丰耐腐蚀长轴渣浆泵V三相30千瓦立式离心泵输送高浓度 ¥28966.00