搜一搜液下渣浆泵过流A尚义液下渣浆泵过流
2,渣浆泵的部分部件归于易损件,在平时运用中要重视易损件的损耗状况,及时对其进行修理或替换。渣浆泵易损件修理或替换的过程中要确保装配准确,空隙调整合理,防止紧涩磨擦表象的呈现。3,渣浆泵的吸入管路体系有必要无漏气状况,一起在操作中应留意吸进口是否有阻塞表象。渣浆泵所需处理的介质多带有固体颗粒,因此在进泵池放置的隔栅应契合渣浆泵所能经过颗粒的需求,削减过大颗粒或长纤维物料进入泵体形成阻塞的也许性。
一、产品概述SP液下渣浆泵为立式离心液下渣浆泵,浸入液下,用于输送磨蚀性、粗颗粒、高浓度渣浆。不需要任何轴封和轴封水,在吸入量不足的工况下也能正常工作。
SP型液下渣浆泵过流部件由耐磨金属制成。
根据渣浆池液面的高低,可选择不同长度的泵传动轴或吸入管。
采用多种速度和多种变型方式,使得泵在最佳工况下运行,使用寿命长,运行效益高,能满足多类恶劣的输送条件。
Second, SP liquid slurry pump application Range
Slurry pump is mainly suitable for conveying corrosive, coarse particles, high concentration slag slurry. Widely used in bbbbllurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Third, SP liquid slag slurry pump structure debbbbbbion
The difference between the slurry pump structure of SPR liquid and the slurry pump under SP liquid is only that the parts of the dipping slag slurry are lined with corrosion-resistant rubber, the parts lined with rubber include shafts, pumps, impellers, protective plates and filters, and the connecting bolts in the lower part of the immersion liquid are equipped with rubber protective sleeves, and the transmission parts and SP pumps
SP Liquid slurry pump pump body, impeller guard plate are made of wear-resistant materials. The pump end of the bearing body adopts a double row tapered roller bearing, and the driving end adopts a single row cylindrical roller bearing, which can withstand the maximum axial load of the pump. The bearing body is fitted with a motor seat or motor bracket, which can be driven by a direct or triangle belt drive. The pump should be immersed in the slurry pool to work, the pump body suction inlet with a filter, can prevent large particles into the human pump. Jdhuiquan5.15
Four, the depth of the liquid can be extended pump self-belt liquid depth of about 70cm, according to customer requirements to increase the depth of the liquid, (the price with the addition of a long number of meters and different) please customers and customer service personnel in advance to explain.
搜一搜液下渣浆泵过流A尚义液下渣浆泵过流
单吸悬臂式结构,用轴承体,固定盘,连接管连接泵的水力部件,液体由出水管部件排出,泵的叶轮为半开式叶轮,在叶轮叶片进口延伸处设有搅拌叶片,该泵主要特点是液下部位的泵轴有足够的刚度,叶轮,泵体之间不设轴承,不采用轴封,可以输送含有较大浓度固体颗粒的介质。立式液下渣浆泵主要用于环保,新型建材,洗煤,市政工程,火力发电,煤气焦化厂,炼油厂,炼钢厂,采矿,造纸业,水泥厂,食品厂,加汽混凝土。液下渣浆泵为单级印染等行业抽吸浓液,稠油,油渣,污浊液,泥浆,灰浆,流砂及城市排污沟道的流动污泥,以及含有煤块,灰渣的液体。也可作为化工,医药等行业抽吸含有泥砂渣物的流体和有腐蚀性液体。。
五、型号意义
40 PV-SP
40----------吐出口径40mm
PV--------- PV型轴承组件
SP----------液下泵
水泵安装
泵安装的好坏对泵的运行和寿命冇重要影响,所以安装和校正必须仔细进行。泵的外形及安装尺寸。
- 公司类型私营独资企业
- 经营模式生产加工-私营独资企业
- 联系人徐经理
- 联系手机13582138818
- 联系固话0312-3428054
- 公司地址河北省石家庄市桥西
-
凌河耐腐蚀长轴渣浆泵V三相15千瓦立式离心泵组装过程 ¥28966.00
-
普兰耐腐蚀立式渣浆泵V沉淀池抽渣立式离心泵单吸悬臂式 ¥28966.00
-
南芬耐腐蚀液下泥浆泵V三相5.5千瓦立式离心泵耐磨蜗壳 ¥28966.00
-
盘山耐腐蚀液下泥浆泵V三相3千瓦立式离心泵耐磨叶轮 ¥28966.00
-
千山耐腐蚀立式渣浆泵V矿用抽渣立式离心泵轴承座 ¥28966.00
-
长海耐腐蚀液下抽渣泵V三相75千瓦立式离心泵拓宽门路 ¥28966.00
-
彰武耐腐蚀立式渣浆泵V地坑排污立式离心泵轴承座 ¥28966.00
-
金州耐腐蚀立式渣浆泵V矿用抽渣立式离心泵单吸悬臂式 ¥28966.00
-
凤城耐腐蚀长轴渣浆泵V三相15千瓦立式离心泵组装过程 ¥28966.00
-
顺城耐腐蚀立式渣浆泵V地坑排污立式离心泵轴承座 ¥28966.00
-
平山耐腐蚀液下泥浆泵V三相4千瓦立式离心泵耐磨蜗壳 ¥28966.00
-
南票耐腐蚀长轴渣浆泵V三相18.5千瓦立式离心泵输送高浓度 ¥28966.00
-
法库耐腐蚀液下抽渣泵V三相37千瓦立式离心泵定制加长轴 ¥28966.00
-
于洪耐腐蚀立式渣浆泵V矿用抽渣立式离心泵单吸悬臂式 ¥28966.00
-
西丰耐腐蚀长轴渣浆泵V三相30千瓦立式离心泵输送高浓度 ¥28966.00