帮我筛选一下液下渣浆泵 样本A康保液下渣浆泵 样本
一、产品概述SP液下渣浆泵为立式离心液下渣浆泵,浸入液下,用于输送磨蚀性、粗颗粒、高浓度渣浆。不需要任何轴封和轴封水,在吸入量不足的工况下也能正常工作。
SP型液下渣浆泵过流部件由耐磨金属制成。
根据渣浆池液面的高低,可选择不同长度的泵传动轴或吸入管。
采用多种速度和多种变型方式,使得泵在最佳工况下运行,使用寿命长,运行效益高,能满足多类恶劣的输送条件。
Second, SP liquid slurry pump application Range
Slurry pump is mainly suitable for conveying corrosive, coarse particles, high concentration slag slurry. Widely used in bbbbllurgy, mining, coal, electricity, building materials, environmental protection and other departments.
Third, SP liquid slag slurry pump structure debbbbbbion
The difference between the slurry pump structure of SPR liquid and the slurry pump under SP liquid is only that the parts of the dipping slag slurry are lined with corrosion-resistant rubber, the parts lined with rubber include shafts, pumps, impellers, protective plates and filters, and the connecting bolts in the lower part of the immersion liquid are equipped with rubber protective sleeves, and the transmission parts and SP pumps
SP Liquid slurry pump pump body, impeller guard plate are made of wear-resistant materials. The pump end of the bearing body adopts a double row tapered roller bearing, and the driving end adopts a single row cylindrical roller bearing, which can withstand the maximum axial load of the pump. The bearing body is fitted with a motor seat or motor bracket, which can be driven by a direct or triangle belt drive. The pump should be immersed in the slurry pool to work, the pump body suction inlet with a filter, can prevent large particles into the human pump. Jdhuiquan5.15
Four, the depth of the liquid can be extended pump self-belt liquid depth of about 70cm, according to customer requirements to increase the depth of the liquid, (the price with the addition of a long number of meters and different) please customers and customer service personnel in advance to explain.
帮我筛选一下液下渣浆泵 样本A康保液下渣浆泵 样本
2,半开式叶轮设计,采用硬质CR26,CR27合金或CR30A脱硫材质。3,筒式轴承组件,选用高容量轴承设计,液下渣浆泵轴承采用脂润滑。4,可调节叶轮与护板之间的间隙,提高使用效率。5,液下渣浆泵与电机可选用直联传动,三角带传动。
五、型号意义
40 PV-SP
40----------吐出口径40mm
PV--------- PV型轴承组件
SP----------液下泵
水泵安装
泵安装的好坏对泵的运行和寿命冇重要影响,所以安装和校正必须仔细进行。泵的外形及安装尺寸。
- 公司类型私营独资企业
- 经营模式生产加工-私营独资企业
- 联系人徐经理
- 联系手机13582138818
- 联系固话0312-3428054
- 公司地址河北省石家庄市桥西
-
凌河耐腐蚀长轴渣浆泵V三相15千瓦立式离心泵组装过程 ¥28966.00
-
普兰耐腐蚀立式渣浆泵V沉淀池抽渣立式离心泵单吸悬臂式 ¥28966.00
-
南芬耐腐蚀液下泥浆泵V三相5.5千瓦立式离心泵耐磨蜗壳 ¥28966.00
-
盘山耐腐蚀液下泥浆泵V三相3千瓦立式离心泵耐磨叶轮 ¥28966.00
-
千山耐腐蚀立式渣浆泵V矿用抽渣立式离心泵轴承座 ¥28966.00
-
长海耐腐蚀液下抽渣泵V三相75千瓦立式离心泵拓宽门路 ¥28966.00
-
彰武耐腐蚀立式渣浆泵V地坑排污立式离心泵轴承座 ¥28966.00
-
金州耐腐蚀立式渣浆泵V矿用抽渣立式离心泵单吸悬臂式 ¥28966.00
-
凤城耐腐蚀长轴渣浆泵V三相15千瓦立式离心泵组装过程 ¥28966.00
-
顺城耐腐蚀立式渣浆泵V地坑排污立式离心泵轴承座 ¥28966.00
-
平山耐腐蚀液下泥浆泵V三相4千瓦立式离心泵耐磨蜗壳 ¥28966.00
-
南票耐腐蚀长轴渣浆泵V三相18.5千瓦立式离心泵输送高浓度 ¥28966.00
-
法库耐腐蚀液下抽渣泵V三相37千瓦立式离心泵定制加长轴 ¥28966.00
-
于洪耐腐蚀立式渣浆泵V矿用抽渣立式离心泵单吸悬臂式 ¥28966.00
-
西丰耐腐蚀长轴渣浆泵V三相30千瓦立式离心泵输送高浓度 ¥28966.00